Kikusui PFX2515, Руководство по эксплуатации, Страница: 16 / 104

16
PFX2512_CE
Applied DC Power Supplies and Electronic Loads
The maximum voltage and the maximum current for charge and discharge testing shall be
determined by the connected DC power supply and the Electronic load unit.
The PFX2512 can be used to perform the charge and discharge testing with the following system
configuration. Select the system which applies to your required charge and discharge testing.
p. 56
Each of the system configuration is assigned for the specific model ID. Set the model ID number
according to your operating system configuration.
The system of which model ID has not been assigned shall be subject to concern when the future
upgrade version is made.
As for the latest information for the system configuration can be confirmed on our website (http://
www.kikusui.co.jp/en). Please contact our distributor or agent for details.
The factory default settings are arranged by the following configuration.
DC Power supply: PWR800L
Electronic load: PLZ1004W (H range)
■
Applied configuration
See
Model ID DC Power
supply Electronic load Maximum charging
power
*1
*1. Because of the route loss, the maximum power may not be reached to the specified number as
indicated.
Maximum
discharging power
7101
*2
*2. Default setting at the time of shipment.
PWR800L PLZ1004W (H range) 800 W 1000 W
7102 PWR800L PLZ1004W (M range) 800 W 1000 W
7103 PWR1600L PLZ1004W (2 units parallel) 1600 W 2000 W
7104 PWR800L PLZ334W (H range) 800 W 330 W
7106 PWR1600L PLZ1004W (H range) 1600 W 1000 W
7107 PAS10-70 PLZ1004W (H range) 700 W 1000 W
7108 PAS20-36 PLZ1004W (H range) 720 W 1000 W
7109 PAS20-54 PLZ1004W (H range) 1080 W 1000 W
7110 PAS40-27 PLZ1004W (H range) 1080 W 1000 W
7111 PWR800L PLZ164W (H range) 800 W 165 W
7112 PAS10-35 PLZ334W (H range) 350 W 330 W