Kikusui PFX2515 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 104

Kikusui PFX2515 Скачать руководство пользователя страница 3

PFX2512_CE

3

When you receive the product, check that all accessories are
included and that the accessories have not been damaged during
transportation.

If any of the accessories are damaged or missing, contact your
Kikusui agent or distributor.

We recommend that you keep all packing materials, in case the
product needs to be transported at a later date.

For the safe use and safe maintenance of this product, the
following symbols are used throughout operation manual and on
the product. Note the meaning of each of the symbols to ensure
safe use of the product. (Not all symbols may be used.)

or

Indicates that a high voltage (over 1 000 V) is used here.
Touching the part causes a possibly fatal electric shock. If
physical contact is required by your work, start work only
after you make sure that no voltage is output here.

DANGER

Indicates an imminently hazardous situation which, if
ignored, will result in death or serious injury.

WARNING

Indicates a potentially hazardous situation which, if
ignored, could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation which, if
ignored, may result in damage to the product and other
property.

Checking the Package Contents

or

or

Power cord (1 pc.)

Operation manual
(This manual, 1 copy)

LAN cable (1 pc.)
Straight type
[91-80-9230]

[ ]

Cable with crimp terminal (4 pcs.)
Red (2 pc.) : 91-80-7557
White (2 pc.) : 91-80-7522

Thermistor (1 pc.)
[38-00-0160]

Sensing connector (1 pc.)
[84-61-7705]

26-conductor flat cable (1 pc.)
(Dc Power Supply I/F cable)
[83-22-6050]

20-conductor flat cable (1 pc.)
(Electronic Load I/F cable)
[91-80-6136]

Lock lever (2 pcs.)
[83-06-5060]

The power cord that is provided varies
depending on the destination for the product
at the factory-shipment.

Rating: 125 Vac/ 10 A

PLUG: NEMA5-15

[85-AA-0003]

[85-AA-0005]

Rating: 250 Vac/ 10 A
PLUG: CEE7/7

[85-10-0790]

Rating: 250 Vac/ 10 A
PLUG: GB1002

Ferrite core for
26-conductor flat cable (1 pc.)
[96-01-0260]

Ferrite core for
20-conductor flat cable (1 pc.)
[96-01-0250]

Indicates a prohibited act.

Indicates a warning, caution, or danger. When this
symbol is marked on the product, see the relevant
section in this manual.

Protective conductor terminal.

Chassis (frame) terminal.

On (supply)

Off (supply)

In position of a bi-stable push control

Out position of a bi-stable push control

Indicates that this product conforms to the
requirements of the Waste Electrical and Electronic
Equipment Directive.
In the EU, this product cannot be disposed of as
domestic household waste.
When disposing of this product, follow the Waste
Electrical and Electronic Equipment (WEEE)
Directive.
In areas outside of the EU, dispose of it as per the
instructions of the local authorities.

Safety Symbols

«
1
2
3
4
5
...
»

Содержание PFX2515









































































































Отзывы:

Нет отзывов