Kikusui PFX2515, Руководство по эксплуатации, Страница: 52 / 104

52
PFX2512_CE
Panel Operation
You can select the function to show the value on the display by the SELECT key on the front panel.
The display can be changed by pressing the SELECT key.
When the power is turned on, the display shows the voltage value.
Outline of the External Control
In addition to the control using the front panel, the PFX2512 can control the following operations
by means of the EXT CONT terminals on the rear panel.
• The external monitoring of the operating status
• Alarm input based on an external contact input signal
The maximum rating of each signal terminal is as follows:
• Maximum voltage: 30 V
• Maximum current (Sink): 8 mA
Panel display Description of the display
VOLTAGE (V) Voltage value
CURRENT (A) Current value
CAPACITY (Ah) capacity value of the DUT (battery)
ELAPSED TIME (s) Elapsed time of the ongoing cycle
CYCLE NO. Test cycle, The display blinks when the test cycle or preliminary discharge is
performed
PROTECT (V) Displays alternately for the H_OVP or H_UVP
ADDRESS Displays, in order, the connection method, IP address, and channel number
of the LAN interface
SELECT key
DISPLAY
Example when the voltage indication is selected
CURRENT (A)
VOLTAGE (V)
ELAPSED TIME
(h-min)
CAPACITY (Ah)
CYCLE NO.
PROTECT (V)
ADDRESS
Illuminates
(green)
Hold down to return to
the voltage display.
(Example of when
ELAPSED TIME is
displayed)
The display description can be changed by pressing the
SELECT key, and the LED (green) of the selected
description illuminates.
You can return to the voltage display from any display by
holding down the key.