Kikusui PFX2515, Руководство по эксплуатации, Страница: 66 / 104

66
PFX2512_CE
Specification
Interface
DC power
supply I/F Exclusive connector for
Kikusui's product
*1
*1. Direct connection with the PWR series, PAS series.
Equipped 1 channel, 26 pin connector, isolation input / output
Electronic load
I/F Exclusive connector for
Kikusui's product
*2
*2. Direct connection with the PLZ-4W series.
Equipped 1 channel, 20 pin connector, isolation input / output
System
Communication LAN (Ethernet) 1 ch; use BPChecker3000
10Base-T/100Base-TX
*3
RJ45 connector (category 5; use a straight cable)
*3. The IP address is assigned automatically through DHCP or set manually through Io Config.
External control REST status signal output L level when in the rest status, isolated open collector output *4
*4. The insulation voltage against other circuits is 80 Vdc with the applied voltage of 30 Vmax and the sink
current of 8 mAmax.
END status signal output L level when the test is completed, isolated open collector
output
*4
ALM status signal output L level when the alarm is activated, isolated open collector
output
*4
CHG status signal output L level when the charge operation is conducted, isolated open
collector output
*4
DISCHG status signal
output L level when the discharge operation is conducted, isolated
open collector output
*4
External alarm input Terminate the test at L level, pull up to +5 V at 5.1 kΩ
Expansion slot 3 slots, for the optional boards