Kia Sportage 2008, Руководство пользователя, Страница: 28 / 227

7/6/12 https://www.kiatechinfo.com/viewer/toc_print.asp?vehicletype=Passenger&mfrcode=KM&area=KM…
28/227 https://www.kiatechinfo.com/viewer/toc_print.asp?vehicletype=Passenger&mfrcode=KM&area=KM…
the mating mark of the clock spring is not properly aligned, the steering wheel may not completely rotate during
a turn, or the flat cable within the clock spring may be broken obstructing normal operation of the SRS and
possibly leading to serious injury to the vehicle's driver.
• Never attempt to disassemble or repair the air bag module or clock spring. If faulty, replace it.
• Do not drop the air bag module or clock spring or allow contact with water, grease or oil. Replace if a dent,
crack, deformation or rust is detected.
• The air bag module should be stored on a flat surface and placed so that the pad surface is facing upward. Do
not place anything on top of it.
• Do not expose the air bag module to temperatures over 85°C(185°F).
• After deployment of an air bag, replace the clock spring with a new one.
• Wear gloves and safety glasses when handing an air bag that has been deployed.
• An undeployed air bag module should only be disposed of in accordance with the procedures mentioned in the
restraints section.
• When you disconnect the air bag module­clock spring connector, take care not to apply excessive force.
• The removed air bag module should be stored in a clean, dry place.
1. Disconnect the battery negative cable and wait at least three minutes before beginning work.
2. After removing the cover(A), then loosen the two airbag module mounting bolts(B).
3. Remove the driver's airbag from the steering wheel, then disconnect the driver's airbag connectors.
The removed airbag module should be stored in a clean, dry place with the pad cover face up.
4. Remove the steering wheel(Refer to ST group in the Service Manual).