Keymile co5ne_r2b, Руководство пользователя

Страница: 96 / 110

User Manual
COGE5, COGE5-F
page 96 of 110 © KEYMILE December 2015 EN/LZTBU 372 144/3 RA
110
User Interface Reference
8.5 AP: / unit-x / neController
8.5.1 AP: / unit-x / neController, Overview
For a description of the
− “Overview - Alarms”
management function, please refer to [302] User Guide “XMC25/XMC23/
XMC22” .
8.5.2 AP: / unit-x / neController, Main
For a description of the
− “Main - General”,
− “Main - Equipment”,
− “Main - Inventory”,
− “Main - Logbooks”, and
− “Main - Software”
management functions, please refer to [302] User Guide “XMC25/XMC23/
XMC22” .
Please note:
In the “Main - Equipment” management function only the “Equipment Status”
properties are available. The “Assignment Status” properties and the equip-
ment commands are not applicable.
8.5.3 AP: / unit-x / neController, Fault Management
For the a description of the general aspects of the
− “Fault Management - Status”, and
− “Fault Management - Configuration”
management functions, please refer to [302] User Guide “XMC25/XMC23/
XMC22” . The following table lists the fault causes of the current AP.
Table 33: AP: / unit-x / neController, Fault Management
ID Fault Cause Event Type Traffic
Affecting Default
Severity Description
GSW General Software
Alarm Equipment
Alarm Major The XMC20 has detected an unspecific
problem with the ESW running on this
unit.
MFA Maintenance Function
Active Communica-
tion Alarm Warning An operator initiated maintenance func-
tion is active on this unit.
SWM Software Mismatch Equipment
Alarm Minor The running ESW does not match the
assigned ESW.
SSWNA Scheduled Software
Not Available Equipment
Alarm Minor The ESW that is scheduled for installa-
tion is not available on the unit. Make
sure that the ESW is downloaded to the
unit.