Kenwood NX-5000 series, Руководство пользователя

Страница: 239 / 264

Adding or Deleting a Channel to/from the Target Channels for Scan (Scan Delete/
Add)
Scan Delete/Add is the function to add a channel to be scanned to the Scan List or delete a channel to be scanned from
the Scan List.
This function is used to reliably receive a call from a primary channel by deleting unnecessary channels to increase the scan
speed.
The following are the transceiver behavior:
0
When Scan is disabled
For a zone with “Single” or “Multi-Zone” configured in Scan Type:
Pressing the Scan Delete/Add key allows you to add the selected channel to the target channels for scan or delete
the selected channel from the target channel s for scan. The Scan Delete/ Add information is retained in the transceiver.
For a zone with “List” configured in Scan Type:
Pressing the Scan Delete/Add key allows you to add the selected channel as a member to the Scan List configured
for the selected channel, or delete the channel from the Scan List configured for the selected channel. The Scan
Delete/ Add information is retained in the transceiver.
0
When the scan is paused
If “Single” or “Multi-Zone” is configured in Scan Type:
Pressing the Scan Delete/Add key allows you to add the selected channel temporarily to the target channels for scan
or delete the selected channel temporarily from the target channels for scan (Temporary Delete/ Add). This status is
retained until the scan is terminated by operations such as pressing the
Scan key, and the status is cleared when the
scan completes.
If “List” is configured in Scan Type:
Pressing the Scan Delete/Add key allows you to add the selected channel temporarily as a member to the Scan List
configured for the selected channel, or delete the channel temporarily from the Scan List configured for the selected
channel (Temporary Delete/ Add). This status is retained until the scan is terminated by operations such as pressing
the
Scan key, and the status is cleared when the scan completes.
0
During the scan
Pressing the Scan Delete/Add key causes a Key-entry Error Tone (1 beep) to sound from the transceiver but the
transceiver does not respond at all.
Note
0
The operation above is enabled even if the transceiver enters Menu Mode by pressing the Menu key and then executes
“Scan Delete/Add”. (Refer to Common FUNC Using Menu Mode .)
0
For the zone with “List” configured in Scan Type , a target channel for scan can be added or deleted in Scan Program
Mode. (Refer to Changing the Scan List (Scan Program) .)
Configuration using KPG-D1/ D1N
Assigning functions to the PF keys on the transceiver ( Transceiver Settings > Key Assignment)
6 SCAN
6.8 Scan Function
P25 FUNC (K)/Ver 2.20 219
CONTENTS INDEX