Kenwood NX-5000 series, Руководство пользователя

Страница: 221 / 264

6.3 Scan by Registering Multiple Target Channels for Scan in the
List (List Scan)
Using the List Scan enables the transceiver to scan the Zone-channels registered as a member in a Scan List.
If a scan starts in a zone where “List” is configured in
Scan Type or on a channel where a Scan List Number is configured,
List Scan is executed. Or, if the transceiver is in the zone where “List” is configured in Scan Type and migrates during the
scan to the channel where a Scan List Number is configured, List Scan is executed.
Operating the transceiver
1
Press the Scan key.
The scan starts after a Key Beep A (1 beep) sounds from the transceiver.
The “
” icon appears and then Revert Channel is displayed.
If “Scan” Displayed is enabled, “Scan nnn” (nnn indicates Scan List No.)
is displayed.
For portable transceivers, the LED flashes according to the configuration
of
Non-Priority Scan LED and Priority Scan LED respectively in the case
of Non-priority Scan and Priority Scan.
Note
The transceiver behaves in the same manner even if the scan is started
by other method. (Refer to
Starting the Scan .)
2
Press the Scan key during the scan.
The scan completes after a Key Beep B (2 beeps) sounds from the
transceiver and the “
” icon disappears.
Menu Zone+
Z o n e 1
C h a n n e l 1
12 : 34
A
M
S c a n 1 2 8
Menu Zone+
Z o n e 1
C h a n n e l 1
12 : 34
A
M
Note
0
If Selected Channel Scan is enabled, the selected channel can be scanned even if the channel is excluded from the
target channels for scan. (Refer to Selected Channel Scan .)
0
If another zone is selected during the List Scan, the transceiver starts the scan according to the configuration in Scan
Type of the selected zone.
6 SCAN
6.3 Scan by Registering Multiple Target Channels for Scan in the List (List Scan)
P25 FUNC (K)/Ver 2.20 201
CONTENTS INDEX