manualshive.com logo in svg

Kenwood NX-5000 series, Руководство пользователя

Поделиться
Скачать
Kenwood NX-5000 series Скачать руководство пользователя страница 77

Note

0

The configurations by using KPG-D1/ D1N are restricted as follows according to the configuration for Zone-channel
Format (Personality or Channel Table).

Personality:

0

2 or more and a maximum of 512 Personalities can be configured for a system with “P25 Voting with NAC” configured.

0

The following functions cannot be configured for a channel with “P25 Voting with NAC” configured:

0

Scan Add

0

Scan List Number

Channel Table:

0

2 or more and a maximum of 512 Personalities can be configured for a zone with “P25 Voting with NAC” configured.

0

The following functions cannot be configured for a channel with “P25 Voting with NAC” configured:

0

Scan Add

0

Scan List Number

0

Emergency Profile Number

0

Key Assignment

0

A Personality or channel with “P25 Voting with NAC” configured cannot be configured for the following functions:

0

Home Channel

0

Scan List Members

0

Emergency Zone – Channel

0

The transceiver does not respond at all even if the following keys are operated on a Personality or channel with “P25
Voting with NAC” configured:

0

Home Channel

 key

0

Home Channel Select

 key

0

Scan

 key

0

If the Emergency behavior of the transceiver is active on the Zone-channel of the system configured as P25 Voting with
NAC, the transceiver behaves according to the configuration of 

Emergency Channel Type

.

0

When 

Zone-channel Format

 is configured as “Personality” and the following conditions are met, the transceiver starts

up in the Emergency Mode on the Revert Channel (Personality).

0

“Selected” is configured for 

Emergency Channel Type

0

A P25 Voting with NAC channel is selected

0

The Revert Channel that is configured as P25 Voting with NAC will be backed up even when the transceiver is turned
off. However, if “Channel Table” is configured for 

Zone-channel Format

, the backed-up Revert Channel will be cleared

when the Zone-channel is changed. If “Personality” is configured for 

Zone-channel Format

, the backed-up Revert

Channel will not be cleared when the Zone-channel is changed.

0

P25 Voting starts if the Zone-channel is changed and a P25 Voting with NAC channel is selected while scan is enabled.

0

If a P25 Voting with NAC Zone-channel is configured as the selected Zone-channel when the transceiver turns on, the
transceiver behaves as follows.

0

When “Channel Table” is configured for 

Zone-channel Format

The backed-up Revert Channel is cleared and the transceiver starts up in the preset P25 Voting with NAC Zone-
channel.

0

When “Personality” is configured for 

Zone-channel Format

If a Revert Channel (Personality) is backed up, the transceiver starts up in this Personality. If a Revert Channel
(Personality) not backed up, the transceiver starts up in the Personality that is configured for the channel.

Configuration using KPG-D1/ D1N

0

Configuring 

“Voting” Displayed

 to be enabled or disabled (

 Transceiver Settings > Scan > Scan Information >

P25 Voting)

0

Configuring 

Voting LED

 (

 Transceiver Settings > Scan > Scan Information > P25 Voting)

1 P25 CONVENTIONAL SYSTEM

1.13 Migrating Automatically to the Site Providing Better Radio Environment (P25 Voting)

P25 FUNC (K)/Ver 2.20

57

CONTENTS

INDEX

Содержание NX-5000 series









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды