manualshive.com logo in svg

Kenwood NX-5000 series, Руководство пользователя

Поделиться
Скачать
Kenwood NX-5000 series Скачать руководство пользователя страница 210

P25 Trunking system

Table 5-5 Configuration Related to OTAR (P25 Trunking system)

Function

Description

OTAR

This is the configuration on whether to enable OTAR.

Disable:

OTAR is disabled. The CAI Packet Data also cannot be received.

RX Only:

Only a KMM can be received. The following messages cannot be transmitted related to KMM
transmission:

0

Rekey Request

0

Delayed Acknowledge

However, transmission of a response message to each message from the KMF of Response
Kind 3 is not restricted.

Unlimited:

OTAR functions without restriction.

Announcement Group
EKR List Number

If 

OTAR

 is configured other than “Disable”, an Encryption Key for encryption is selected from the

Encryption Key Reference List of the specified KMF Profile when using Announcement Group
Call.

KMF Profile Number

This is the configuration of the KMF Profile No. applied to the system.

Individual ID List

Functions related to the KMF Profile can be configured for each ID in Individual ID List.

KMF Profile:

This is the configuration on whether to enable selection of an Encryption Key for encryption
used in combination with an Individual ID, from the Encryption Key Reference List of the KMF
Profile.

KMF Profile Index:

This is the configuration of the KMF Profile No. applied to an Individual ID.

EKR (Encryption Key Reference) List No.:

This is the configuration of the Encryption Key for encryption to be used. This can be selected
from the Encryption Key Reference List of the specified KMF Profile.

Talkgroup ID List

Functions related to the KMF Profile to be applied can be configured in Talkgroup ID List.

KMF Profile:

This is the configuration on whether to enable selection of an Encryption Key for encryption
used in combination with a Talkgroup ID, from the Encryption Key Reference List of the KMF
Profile.

KMF Profile Index:

This is the configuration of the KMF Profile No. applied to a Talkgroup ID.

EKR (Encryption Key Reference) List No.:

This is the configuration of the Encryption Key for encryption to be used if anything other than
“Disable” is configured in 

OTAR

. This can be selected from the Encryption Key Reference List

of the specified KMF Profile.

Encryption Key
Reference List No. of
Telephone Call

An Encryption Key for encryption is selected from the Encryption Key Reference List of the
specified KMF Profile when using Telephone Call.

Encryption Key
Reference List No. of
Dynamic Talkgroup

An Encryption Key for encryption is selected from the Encryption Key Reference List of the
specified KMF Profile when using Dynamic Talkgroup.

Encryption Key
Reference List No. of
Patch Talkgroup

An Encryption Key for encryption is selected from the Encryption Key Reference List of the
specified KMF Profile when using Patch Talkgroup.

Encryption Key
Reference List No. of
Failsoft

An Encryption Key for encryption is selected from the Encryption Key Reference List of the
specified KMF Profile when using Telephone Call.

Key Reference List No.
of Packet Data

An Encryption Key for encryption is selected from the Encryption Key Reference List of the
specified KMF Profile when using Failsoft.

5 P25 OTAR

5.4 Configuration using KPG-D1/ D1N

P25 FUNC (K)/Ver 2.20

190

CONTENTS

INDEX

Содержание NX-5000 series









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды