manualshive.com logo in svg

Kenwood NX-5000 series, Руководство пользователя

Поделиться
Скачать
Kenwood NX-5000 series Скачать руководство пользователя страница 17

Revision History

Date

Description

2015.10.31

1) Added NX-5900 (700 MHz/ 800 MHz model) as a supported model.
2) Added the information of KCH-20R (Featured Panel) as a supported Control Head.
3) Added KPG-36X and KPG-46X as supported programming cables.
4) Changed the description in “About this Manual” as follows:

0

Changed the version information

0

Changed the Left Up key to the [+] key

0

Added Radio Feature License

5) Added terms to “Abbreviations Used in this Document”.
6) Added “About Multi RF Deck/ Multi Control Head”.
7) Added option information to “About Options to Use the Functions Described in this Document”.
8) Corrected the address of the reference help texts according to V1.60 of the help texts.
9) Corrected the description of “Auto Reset Timer” of P25 Conventional.
10) Added “Multi-Zone Scan” to P25 Conventional “Searching Whether the Transceiver Receives a Call

(Scan)”.

11) Added the description related to the behavior of a channel with “Mixed” configured in Channel Type to

the following items:

Avoiding Interference with Other Communications (Busy Channel Lockout)
Temporarily Disabling the Squelch (Squelch Off)
Temporarily Disabling the Signaling (Monitor)
Unmuting the Speaker by Linking with the Microphone (Off-hook Decode)
4.1 Toggling the Encryption during Transmission between Enabled and Disabled

12) Added the note to “Using a Channel Being Used by Other Parties (BCL Override)”.
13) Corrected the description on the configuration range in “Changing the Transmit Time for Preamble Data

at the Beginning of Transmission (Preamble Length)”.

14) Added “Changing the Transmit Time for Preamble Data at the Beginning of Data Transmission (Data

Scan Preamble Time)” to “1.1 Initiating Voice Communications (Basic Transmission and Reception)”

15) Added “Using the Optional Signaling (P25)”to “1.2 Using the Signaling”.
16) Added “1.3 Waiting for Both Digital Signals and Analog Signals (Mixed Mode)”.
17) Corrected the description and procedure of the migration operation to Individual Call Mode of P25

Conventional and P25 Trunking.

18) Added “1.7 Using 2-tone to Initiate an Individual Call”.
19) Added “1.8 Using the Tactical Zone”.
20) Added the note to “1.11 Disabling the Transceiver Capability by Remote Control (Radio Inhibit /

Uninhibit)”.

21) Added “1.13 Migrating Automatically to the Site Providing Better Radio Environment (P25 Voting)”.
22) Added “Sending and Receiving a Text Message (Text Messaging)”.
23) Added the note to “Receiving an Individual Call” of “2.5 Making an Individual Call”.
24) Added the note to “Receiving a Telephone Call” of “2.8 Communicating with a Telephone (Telephone

Call)”.

25) Added the note to “3.1 Placing the Transceiver in Emergency Mode”.
26) Added “About the Behavior in Emergency Mode in a P25 Voting Zone” to “3.2 Configuration Related to

Transmission and Reception in Emergency Mode”.

27) Added the note to “Emergency Channel Type”.
28) Corrected the description on the configuration range in “Emergency Microphone Sense”.
29) Added “Background Transmission” to “3.4 Automatically Transmitting and Receiving in Emergency

Mode”.

30) Added the behavior description to “Emergency LED”.
31) Added the description of the turn-off behavior for Mobile to “Suspended Power-off”.
32) Added the description of DES encryption type (Built-in DES) in “4 COMMUNICATION SECURITY”.
33) Added “Data Encryption” to “4.3 Transceiver Behavior upon Transmission of Encrypted Communication

Data”.

34) Added KWD-DE31 to Table 4-2.
35) Added “4.6 Built-in DES”.
36) Added the note to “5 P25 OTAR”.

　

Revision History

P25 FUNC (K)/Ver 2.20

xvi

CONTENTS

INDEX

Содержание NX-5000 series









































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды