Section 6: Instrument programming
Models 707B and 708B Switching Matrix Reference Manual
6-34
707B-901-01 Rev. A / August 2010
Programming example
Script with a for loop
The following script puts a message on the front panel display slowly — one character at a time. The
intent of this example is to demonstrate:
•
the use of a
for
loop
•
simple display Instrument Control Library (ICL) commands
•
simple Lua string manipulation
NOTE
When creating a script using the TSB Embedded, you do not need the shell commands
loadscript
and
endscript
, as shown in the examples below.
Example: User script
User script created in TSB Embedded
User script created in user's own program
loadscript
display.clear()
myMessage = "Hello World!"
for k = 1, string.len(myMessage) do
x = string.sub(myMessage, k, k)
display.settext(x)
print(x)
delay(1)
end
display.clear()
myMessage = "Hello World!"
for k = 1, string.len(myMessage) do
x = string.sub(myMessage, k, k)
display.settext(x)
print(x)
delay(1)
end
endscript