Keithley 707B, Справочное руководство

Страница: 119 / 559

Section 2: General operation Models 707B and 708B Switching Matrix Reference Manual
2-100 707B-901-01 Rev. A / August 2010
NOTE
Channel patterns inherit the delay times of the individual channels that comprise the pattern. For
information on the sequence of close operations on multiple channels, refer to
Connection methods
for close operations (on page 2-89).
When you create a channel pattern, make sure to:
•
Include all of the channels that are needed for that channel pattern.
•
Check that channels contained in the pattern are correct.
•
Check that channels contained in the pattern create the desired path connection.
•
Make sure that channels that you want to include in the pattern are not set to forbidden to close.
When naming the channel pattern, be aware:
•
The first character of the name must be alphabetic (upper or lower case)
•
Names are case sensitive
•
Pattern names must be different than row, column, and channel labels
To create a channel pattern from the front panel:
1. Close the channels you want to include in the channel pattern.
2. Press the PATT key.
3. From this menu, select the CREATE menu item.
4. From this menu, select the SNAPSHOT menu item.
5. At the prompt, enter a pattern name using the navigation wheel.
6. Use the ENTER key to apply the selection.
7. Use the EXIT key to leave the menu.