Section 2: General operation
Models 707B and 708B Switching Matrix Reference Manual
2-92
707B-901-01 Rev. A / August 2010
To enable sequential connections through the front panel interface:
1. Press
the
MENU
key.
2. Use the navigation wheel to scroll to the CHANNEL menu item.
3. Press
the
ENTER
key.
4. Select the SEQUENTIAL menu item.
5. Select ON or OFF.
6. Use
the
ENTER
key to apply the selection.
7. Use
the
EXIT (LOCAL)
key to leave the menu.
To enable sequential connections through the web interface:
1. Open
the
UNIT
page.
2. In the upper left corner, select the Sequential check box (next to the Channel Connect Rule list).
To enable sequential connections through the remote command interface:
Send the command:
