Models 707B and 708B Switching Matrix Reference Manual
Section 2: General operation
707B-901-01 Rev. A / August 2010
2-101
To create a channel pattern from the web interface:
1. From the left navigation, click a slot.
2. Click
Pattern
(above the Channel Action Type box). The Channel Pattern Configuration dialog
box is displayed.
Figure 55: Channel pattern configuration dialog box
3. Enter a name in the box at the top.
4. From the Channels Available list, select the channels you want to add. You can use Ctrl+click and
Shift+click to select multiple channels.
5. Click
Add
.
6. When the Selected channel list is complete, click
Create
.
NOTE
If you close the channels you want to add to the new pattern, you can enter a name and click
Snapshot
to create the new pattern. The closed channels are added to a new pattern.
