manualshive.com logo in svg

Keithley 2790, Справочное руководство

Поделиться
Скачать
Keithley 2790 Скачать руководство пользователя страница 276

Model 2790 SourceMeter Switch System Reference Manual

9-11

Setting digital output

The OUTPUT menu (shown in 

Table 9-1

) is used to control and configure digital outputs. 

Menu items for the digital output include:

•

DOUTPUT

 — Use to enable (ON) or disable (OFF) the digital outputs.

•

PULSE

 — Use to enable (YES) or disable (NO) the pulse option for the digital 

outputs.

klqb

The factory default pulse time is 2ms maximum. Using remote programming, 
pulse time can be set from 0.001 to 99999.999 sec. It cannot be set from the front 
panel.

•

LSENSE

 — Use to select the logic sense: active HIGH or active LOW. With active 

high selected, an output will be at approxi5V when a reading is at or 
exceeds the limit. Conversely, with active low selected, an output will be at 0V 
when a reading reaches or exceeds the limit.

•

MASTR LATCH

 — Use to enable (Y) or disable (N) the master limit latch. When 

enabled, the master limit remains latched when a reading limit is reached or 
exceeded. When disabled, the master limit line releases immediately when the 
reading is inside all four limits.

Perform the following steps to enable and configure digital outputs:

1.

Press SHIFT and then OUTPUT.

2.

If the digital output is already on (DOUTPUT: ON), proceed to step 3. Otherwise, 
press

to move the cursor to the right, press the 

 or 

key to display “ON,” 

and press ENTER.

3.

Use the

key to display the master limit latch (MASTR LATCH) setting: N (no) 

or Y (yes).

4.

If you want to retain the present master limit setting, proceed to step 5. Otherwise, 
press

to move the cursor to the right, press

 or 

key to display “Y” or “N,” 

and press ENTER.

Table 9-1

OUTPUT menu

Menu item

Setting

Description

DOUTPUT

ON or OFF

Enable/disable digital outputs.

PULSE

YES or NO

Enable/disable digital pulse 

output.

LSENSE

HIGH or LOW

Select logic sense.

BEEP

NEVER, INSIDE, or OUTSIDE Set beeper for limits

(see “

Limits

” for details).

MASTR LATCH

Y or N

Enable/disable master limit latch.

Содержание 2790

























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды