manualshive.com logo in svg

Keithley 2790, Справочное руководство

Поделиться
Скачать
Keithley 2790 Скачать руководство пользователя страница 163

4-16

Model 2790 SourceMeter

®

 Switch System Reference Manual

Filter control and configuration

The FILTER key toggles the state of the Filter. When the Filter is enabled, the FILT 
annunciator is on. The FILT annunciator will flash when the filter is not settled. When 
disabled, the FILT annunciator is off. The filter can be configured while it is enabled or 
disabled.

The filter is configured from the filter configuration menu (

Figure 4-3

). Perform the fol-

lowing steps to configure the filter:

1.

Select the desired function.

2.

Press SHIFT and then TYPE. The present WINDOW setting will be displayed.

3.

Use the RANGE

or

key to display the desired window setting (0.01%, 0.1%, 

1%, 10%, or NONE)  and press ENTER.

4.

Use the

, 

, 

, and 

keys to display the number of readings to filter (1 to 

100) and press ENTER.

5.

Use the

or

key to display the desired filter type (moving or repeating) and 

press ENTER. The filter turns on and the instrument returns to the normal mea-
surement state. 

klqb

While the filter is enabled (FILT annunciator on), changes to the configuration 
take effect as soon as they are made. With filter disabled (FILT annunciator off), 
changes to the configuration take place when the filter is enabled. 

While the filtering operation is in progress, the FILT annunciator blinks. Read-
ings will continue to be processed (i.e., displayed, stored, sent over the bus), but 
they could be questionable. When the FILT annunciator stops blinking, the filter 
has settled.

Changing function or range causes the filter to reset. The filter then assumes the 
state (enabled or disabled) and configuration for that function or range.

Содержание 2790

























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды