Operators Manual
Section 2-3
Also displayed on the keypad are additional input keys.
The following keys are used to test inputs and outputs:
TEST OUTPUT (Up arrow):
This key is used to select which
output is to be tested. Pressing this key will increment
the output number up to the next available output.
TEST INPUT (Write):
This key is used to select which
input is to be tested. Pressing this key will increment
the input number up to the next available input.
ON / OFF:
Use of this key will turn ON/OFF the selected
output. This key will also turn on and off the duster or
pindeck spray in the appropriate menus.
EXIT I/O (Down arrow):
This key is used to exit the TEST
I/O section.
The following keys are used when preparing the machine:
PRIME PUMP (HR):
This key will allow the operator to
prime the spray pump prior to cleaning the first lane.
TEST CLEAN (Change):
Use of this key will allow the
operator to check how well the machine is cleaning the
lane prior to cleaning and conditioning simultaneously.
The following keys are used for internal programming
functions in the PC of the machine. Tech Support may
instruct you to use the following keys during trouble-
shooting.
SHIFT
HR
CONTACT
CHANNEL
DM
CHANGE
MONITOR
SET
RESET
CLEAR
WRITE
