Operators Manual
Section 5-2
4.
Once the cloth is square in the machine, push it between
the cushion roller and the stainless steel routing bar.
5.
Pull the cloth far enough through the Routing assembly to
get at least 3 or 4 wraps around the PVC take-up reel.
Make sure the cloth is wrapped evenly from side to side
around the pipe. Use the PVC clamps to hold the cloth.
6.
Place the take-up reel in the machine first and then the
fresh roll of cloth.
7.
Apply power to the machine and bring up the
DUST
CTRL&RSET
menu.
8.
The start button on the handle can be used to take-up the
slack from the fresh roll of cloth. Push and hold the
button in, the unwind motor will operate. The next time
the button is depressed and held in, the wind-up motor
will run until the wind-up switch is actuated. The cloth
should be rolled up taut and evenly across the assembly.
WARNING!! If the button is held too long when winding
the cloth up, it could break the PVC take up roller
if the Wind-Up Switch is not working properly.
