manualshive.com logo in svg

Kegel Sanction Technology, Руководство пользователя

Поделиться
Скачать
Kegel Sanction Technology Скачать руководство пользователя страница 75

Operators Manual 

 

Section 4-53 

 

Depress the 

NEXT

 key, the drive motor will run in 4th 

speed and the following will appear: 

 

* ADJUST IPS 4 

HIT NEXT KEY 22 

 

 

The prompt is telling the operator that the drive motor 

is running in fourth (4).  The second line of the display 
indicates the speed of the drive wheel surface in INCHES PER 
SECOND.  To change the speed, adjust the 4th speed pot from 
the left.  The factory setting for the fourth speed is 22 
inches per second. 

 

 

 

 

Depress the 

NEXT

 key, the drive motor will run in 5th 

speed and the following will appear: 

 

* ADJUST IPS 5 

HIT NEXT KEY 26 

 

 

The prompt is telling the operator that the drive motor 

is running in fifth (5).  The second line of the display 
indicates the speed of the drive wheel surface in INCHES PER 
SECOND.  To change the speed, adjust the 5th speed pot from 
the left.  The factory setting for the fifth speed is 26 
inches per second. 

 

Содержание Sanction Technology




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды