manualshive.com logo in svg

Kegel Sanction Technology, Руководство пользователя

Поделиться
Скачать
Kegel Sanction Technology Скачать руководство пользователя страница 73

Operators Manual 

 

Section 4-51 

9. Adjust IPS Menus

 

 

 

This series of screens will be used to adjust various 

speeds of the machine as it changes from 1st to 7th.  Six 
speeds are used for conditioning, with one high speed (7th) 
for returning to the foul line. 

 

DO NOT ADJUST THE IPS ACCESSED BY THESE SCREENS 

UNLESS THE SPEEDS ARE INCORRECT!! 

 

 

Depress the 

MENU

 key until the following screen appears: 

 

* ADJUST IPS 0  

HIT NEXT KEY 00 

 

 

Depress the 

NEXT

 key, the drive motor will run in low 

speed and the following will appear: 

 

* ADJUST IPS 1 

HIT NEXT KEY 10

 

 

 

The prompt is telling the operator that the drive motor 

is running in low speed (1).  The second line of the display 
indicates the speed of the drive wheel surface.  This speed 
is being displayed in INCHES PER SECOND.  To change the 
first speed, adjust the first speed pot on left side of the 
printed circuit board assembly.  The factory setting for the 
first speed is 10 inches per second. 

 

Содержание Sanction Technology




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды