Operators Manual
Section 6-1
Section VI - Maintenance
Maintenance:
The following items should be done to the
machine on a regular basis:
A. Power Cord
Care should be taken to see that the power cord is
handled properly and stored correctly.
Do
NOT
wrap the cord around the machine for storage.
Some type of cord wrap or cord spool for suitable means of
storage will add life to the cord.
Make large loops when wrapping the cord.
Should the power cord become damaged or frayed, it
should be repaired or replaced
IMMEDIATELY
!
To keep the power cord clean, pull it through a rag as
it is being wound for storage.
B. Squeegee
Wipe with a clean cloth after each operation. Check
the blades for wear and tear. The edges of the blades
should be sharp and square. Rounded edges mean it's time to
replace the blades.
C. Sensors
All sensors can be cleaned by blowing out with an air
compressor. This will remove oil and dust build-up which
could cause false sensing. Sensors may need to be sprayed
lightly with electrical contact cleaner (the type for PC
boards).
D. Lane-to-Lane Casters
Clean after each operation.
E. Drive Wheels
Clean daily after each operation.
