Operators Manual
Section 4-18
F. Operator RUN/PREP Options
The operator of this equipment is given two RUN
PREPARATION Options that can be selected prior to running
the machine
on the first lane.
NOTE:
The RUN/PREP Option
MUST
be selected prior to
pressing the Start Button on the Handle.
The RUN/PREP keys are located on right hand side of the
keypad.
Once the Starting and Last Lanes have been chosen and
the Start key on the keypad has been depressed the following
prompt will be displayed:
0000 #01 IS NEXT
0000 0000 01
At this time either one of the RUN/PREP options can be
activated.
1. Prime Pump
NOTE:
If the PRIME PUMP option is going to be used the
machine should first be pushed onto the lane surface. This
will insure that cleaner is not sprayed onto the approach
where the cleaner may damage the approach finish.
Pressing the PRIME PUMP key will activate the pump
motor. This key can be pressed more than once to check the
spray pattern and insure proper flow of cleaner from the
spray tips.
