Operators Manual
Section 4-8
If the cleaning/conditioning program is incorrect, it
will be necessary to access the Managers Menus to change the
program selection.
Once all information is acceptable, depress the
START
key.
At this point, this prompt will appear:
0000 #01 IS NEXT
0000 0000 01
The top line tells the operator two things. The first
four digits (on the left) are the amount of time the
conditioning valve is on during the forward and reverse
travel. This number can be used to trouble-shoot the head
travel of the machine. If the head slows down this counter
will get larger. When running the same pattern on every
lane this number should stay fairly consistent.
The next number tells the operator which lane is the
next to be conditioned. This is one of the reasons you
should always enter the starting and ending lanes for the
actual lanes you will be doing.
The number displayed on the right side of the bottom
line is the program being run. The four digit number
displayed on the left is the
running time for the current
lane being cleaned/conditioned (in tenths of seconds).
IMPORTANT!
The "
Enter"
key
MUST
be depressed
to accept starting and ending lane information,
even if new starting and ending lane numbers are
not needed. If the
"Enter"
key is not depressed
in both the starting and ending screens, the
machine
will not start.
