Operators Manual
Section 4-41
This prompt tells the operator that the machine will
move “03” inches forward after the PC receives a signal from
the failsafe switches. The machine must travel this
distance at 10 inches per second.
The value can be set as high as 12 inches.
CAUTION
: Setting the value too high will cause the machine
to travel into the pit and not reverse.
Use the UP or DOWN ARROW to change the number on the
right side of the screen. When the desired number is
reached depress ENTER.
Depress the
NEXT
key and the following will appear:
VACUUM DIST
20 OFF FOR 20
This screen is used to determine how long the vacuum
motor will turn off as the machine returns to the foul line.
This prompt tells the operator that the machine will move
20' in reverse with the vacuum OFF. At that point the
vacuum motor will turn ON for the rest of the travel
distance.
If dripping appears on the lane in reverse, the distance
it remains OFF may have to be reduced.
This concludes the selections in the
SYSTEM CONTROL DISTANCE menu.
