MAINTENANCE UNDER SPECIAL ENVIRONMENTAL CONDITIONS
9-1
Operating
Conditions
Precautions for Maintenance
Muddy Soil, Rainy
or Snowy Weather
Before Operation: : Check tightness of plugs and all drain cocks.
After Operation
: Clean the machine and check for cracks and damage. Check for loose or
missing bolts and nuts. Lubricate all necessary parts.
If the machine should be submerged in water more than approximately 450
mm (17.7 in) water may get into the brake device (like the park brake), resulting
in poor braking performance. Watch out when starting/stopping the machine.
Near the Ocean
(or near chemical
treatment place)
Before Operation: : Check tightness of plug and all drain cocks.
After Operation
: Thoroughly clean the machine with fresh water to wash off salt.
Service electrical equipment often to prevent corrosion.
Dusty Atmosphere Air Cleaner
: Clean the element regularly at shorter service intervals when indicator
illuminates.
Radiator
: Clean the oil cooler and the radiator cores.
Fuel System
: Clean the filter element and strainer regularly at shorter service intervals.
Electrical
Equipment
: Clean them regularly, in particular, the commutator surface of the alternator
and starter.
Rocky Ground
Chassis
: Check for damage on tires, for loose, cracked, worn, and damaged bolts and
nuts.
Front
Attachment:
: Standard attachment may be damaged when digging rocky ground. Use a
heavy duty bucket. Consult your nearest Kawasaki dealer.
Freezing Weather
Fuel
: Use high quality fuel suitable for low temperature.
Check the fuel tank breather pipe freezing.
Lubricant
: Use high quality low viscosity hydraulic oil and engine oil.
Engine Coolant
: Be sure to use antifreeze.
Battery
: Fully charge the batteries regularly at shorter service intervals. If not charged
fully, electrolyte may freeze.
Tires and Frames : Keep tires and frames clean. Park the machine on a hard surface to prevent the
tires from freezing to the ground.
When handling
old paper and/or
industrial waste
Engine
compartment
: Remove old paper and/or waste accumulated around the radiator and in the
engine compartment, possibly causing overheating or fires of the machine if
not removed.
Air cleaner
: Clean the element at shorter intervals.
Fuel system
: Clean and replace the elements and the filters at shorter intervals.
Loader frame
: Remove the accumulated paper and/or waste from the surroundings around
the loader frame and the attachment. Failure to do so may cause damage of the
machine.
Radiator
: Wash as frequently as possible to prevent corrosion due to chemical materials.
IMPORTANT: If material to be handled is a substance that causes corrosion such as salt or chemical, consult your
nearest Kawasaki dealer. Special modification or treatment may be needed for the machine. If the machine
continues to be used, malfunction may occur due to corrosion.
Consult your nearest Kawasaki dealer when the machine is operated under special condition (s).
Maintenance Under Special Environmental
Conditions
WARNING:
y
Before operating the machine in a river, check the
riverbed conditions in advance.
y
Avoid driving the machine into a river where the
riverbed is steep and deep or the stream is rapid.
Содержание 70Z7
