KCM 70Z7 Скачать руководство пользователя страница 168 | Manualshive

Страница: 168 / 383

KCM 70Z7 Скачать руководство пользователя страница 168

OPERATOR'S STATION

1-107

Steps

WARNING: When getting on and off the machine, use

steps and hand rails to support your body with at least
three points of contact. Getting on and off the machine
with less than three support points may cause you to
slip, possibly resulting in a falling accident.

Although the steps are provided on both sides of the machine,
only use the steps on the left side for cab entry. The control
levers are located on the right side, obstructing easy access.

Right side steps are for emergency exit only.

Inspect the steps and handrails daily. Immediately repair or
replace any that are missing or damaged.
Clean the steps of any mud, snow or ice before entering or
exiting the cab.

Tool Box

Use tool box to store tools. Stopper (1) is provided inside of the
cover.

1

MNDB-01-029

MNDB-01-030

«
...
166
167
168
169
170
...
»

Содержание 70Z7
































































































































































































































































































































































































Отзывы:

Нет отзывов