manualshive.com logo in svg
  • Главная
  • /
  • KCM
  • /
  • 70Z7
  • /
  • Руководство по эксплуатации и техническому обслуживанию

KCM 70Z7, Руководство по эксплуатации и техническому обслуживанию

"KCM 70Z7" - высококачественный гидравлический экскаватор, предоставляющий решения для различных строительных задач. Для правильной эксплуатации и обслуживания необходимо загрузить бесплатное Руководство по эксплуатации и техническому обслуживанию с manualshive.com. Убедитесь, что ваш экскаватор работает на максимальной производительности.

Поделиться
Скачать
background image

MAINTENANCE

7-37

WARNING:  Take care not to let transmission oil adhere 

to parking brake disk (9). If oil adhered, completely 
remove oil.

8.  Put the cover on parking brake disk (9) to prevent 

transmission oil from adhering.

9.  Using a filter wrench, turn cartridge filter (6) 

counterclockwise to remove it.

10.  Clean the filter-seating surface. After coating the new 

cartridge filter gasket surface with new oil, lightly turn 
the cartridge filter clockwise by hand until the cartridge 
filter sealing surface comes in contact with the filter-
seating surface.

11.  At this time, tighten the cartridge filter an additional 

3/4 turn with a filter wrench. Take care not to tighten 
the filter cartridge excessively. Be careful not to damage 
filter cartridge by overtightening.

12.  Refill the specified amount of oil through transmission 

oil filler port (7).

21 liters (5.5 gallons) 

 

NOTE: 

Oil amount in entire T/M assy: 30 liters (7.9 gallons) 

13.  Start the engine and keep it running for two minutes.

14.  Check that the oil level is within the specified range in oil 

level gauge (8). Refill as necessary.

NOTE:  Never reuse cartridge type element (6). Install the 

cartridge with care so that the O-ring is not damaged due to 
twisting. Check for any oil leakage at the drain plug and the 
filter mounting area.

8

7

6

9

MNEC-07-014

Содержание 70Z7
































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 70Z7

Бренды по названию

Популярные бренды

Загрузить еще бренды