KCM 70Z7, Руководство по эксплуатации и техническому обслуживанию

Страница: 149 / 383

OPERATOR'S STATION
1-88
Adjusting Operator's Seat (Air Suspension Type
Seat)
Adjust the seat for comfort and so that the pedals may be
pushed fully down when the operator's back is fully against
the seat back.
Components Name
1- Armrest Angle Adjustment
2- Lumbar Support Adjustment
3- Reclining Angle Adjustment
4- Damper Adjustment
5- Fore-Aft Position Adjustment
1. Rotate control knob (1) to select desired angle. The
armrests will pivot up and parallel with backrest when
not in use.
2. Turn adjustment knob (2) for desired lumbar support.
3. Lift handle (3) and allow the back cushion to angle
forward, or lean backward into the cushion. Release the
handle at desired position.
4. With the key turned "ON" push the knob (4) to increase
the air pressure. This will raise the seat and make a firmer
ride. Pull the knob (4) to reduce the air pressure (air will
be vented). This will lower the seat and make a softer
ride.
When properly adjusted the seat will not "bottom out"
over rough terrain.
5. Lift handle (5) and move the seat forward or backward.
Release handle (5) at one of the several positions.