KCM 70Z7 Скачать руководство пользователя страница 252 | Manualshive

Страница: 252 / 383

KCM 70Z7 Скачать руководство пользователя страница 252

MAINTENANCE

7-11

Rear Grille

CAUTION:

y

Open or close rear grille (2) only after stopping the

engine. Failure to do so may create a very dangerous
situation as entanglement with the cooling fan may
result.

y

Before running the machine, always check that rear

grille (2) is not open.

y

Rear grille (2) may spring open. Take care not to be

hit by the rear grille.

Opening the rear grille

Push open/close button (1) laterally to open rear grille (2)
upward. This provides access to the area under the grille
allowing the fuel tank to be refilled and/or the cooling fan
to be cleaned.

Closing the rear grille

While holding rear grille (2), slowly close rear grille (2)
downward until a “click” sound is heard.

1

2

MNEC-01-510

MNDB-01-017

«
...
250
251
252
253
254
...
»

Содержание 70Z7
































































































































































































































































































































































































Отзывы:

Нет отзывов