KCM 70Z7 Скачать руководство пользователя страница 23

Страница: 23 / 383

SAFETY

S-12

Keep Riders Off Machine

Riders on machine are subject to injury such as being struck

by foreign objects and being thrown off the machine.

Only the operator should be on the machine. Keep riders

off.

Riders also obstruct the operator’s view, resulting in the

machine being operated in an unsafe manner.

Drive Safely

Beware of the possibility of slipping and / or turning over

the machine when driving on a slope.

When driving on level ground, hold the bucket at mark

(A) 300 mm (12 in) above the ground as illustrated.

Avoid traveling over any obstacles.

Drive the machine slowly when driving on rough terrain.

Avoid quick direction changes. Failure to do so may cause

the machine to turn over.

If the engine stops while driving, the steering function

becomes inoperative. Immediately stop the machine by
applying the brake to prevent personal accident.

SA-427

SA-448

Содержание 70Z7
































































































































































































































































































































































































Результаты поиска

Содержание 70Z7

Отзывы:

Бренды по названию

Популярные бренды

KCM 70Z7, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание 70Z7

Отзывы:

Бренды по названию

Популярные бренды