KCM 70Z7 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 383

KCM 70Z7 Скачать руководство пользователя страница 24

SAFETY

S-13

Drive Machine Safely (Work Site)

y

Before driving the machine, always confirm that the

steering wheel / and forward / reverse lever (switch)
direction corresponds to the direction you wish to drive.

x

Be sure to detour around any obstructions.

y

Driving on a slope may cause the machine to slip or

overturn, possibly resulting in serious injury or death.

x

When driving up or down a slope, keep the bucket facing

the direction of travel, approximately 200 to 300 mm
(approximately 8 to 12 in) (A) above the ground.

x

If the machine starts to skid or becomes unstable,

immediately lower the bucket to the ground and stop.

y

Driving across the face of a slope or steering on a slope
may cause the machine to skid or overturn. If the direction
must be changed, move the machine to level ground, then,
change the direction to ensure safe operation.

WRONG

SA-449

SA-450

SA-451

«
...
22
23
24
25
26
...
»

Содержание 70Z7
































































































































































































































































































































































































Отзывы:

Нет отзывов