KCM 70Z7, Руководство по эксплуатации и техническому обслуживанию

Страница: 195 / 383

MOVING THE MACHINE
4-8
Parking Brake Switch
WARNING:
y
To prevent accidents due to running away of the
machine, after parking the machine or before
leaving the machine, be sure to apply the parking
brake.
y
Never apply the parking brake switch (1) while
moving the machine except in an emergency.
Premature wear and/or damage to the parking brake
may result. After the parking brake has been applied
in an emergency while moving the machine, have the
parking brake checked at your nearest authorized
dealer.
1. Press the OFF side of parking brake switch (1) to release
the parking brake. Check that parking brake indicator (2)
goes OFF by pressing the switch firmly twice.
Press the ON side of parking brake switch (1) to apply the
parking brake.
Operate the parking brake after stopping the machine
on level ground.
NOTE: While running the engine, when the parking brake
is applied with forward/reverse selector switch lever (3) in
neutral, parking brake indicator (2) comes ON.
2. While running the engine, when the parking brake
is applied with forward/reverse lever (3) in either
the forward (F) or reverse (R) position, parking brake
indicator (2) comes ON, and the alarm buzzer sounds.
F-N-R display (4) of the monitor display indicates "N"
not "R". The display will not indicate "F" and "R" until the
parking brake is released.
3. To ensure safe operation, when the engine is stopped,
the parking brake is applied even if parking brake switch
(1) is in the OFF position.
In this case even after the engine is restarted, the
parking brake will not be released. After starting the
engine, push the ON position of parking brake switch (1)
once. Then, push the OFF position parking brake switch
(1) to release the parking brake.
1
ON OFF
1 3
4 2
MNEC-01-058-KC
MNDB-01-008
MNDB-01-002