Karel DS200, Техническое справочное и монтажное руководство

Страница: 211 / 222

DS Series PBX Technical Reference And Installation Guide
201
*
WARNING
1) In order to turn on and off a cabinet-type system, the mains and primary battery
switches that are on the front of the cabinet are used.
2) The correct way of powering the system is putting the batteries in use after
turning the system on.
3) The correct way of shutting down the system is putting the batteries out of use
before turning the system off.
XVIII.2. DS200S & DS200M
1) One makes sure the entire cables in the rack have been connected properly.
2) The mains and battery switches on the SPS200M module are checked to see whether
they are off.
3) The mains cord is connected to the SPS200M module and then it is plugged into an
outlet of the building, which has been grounded correctly.
4) The batteries are connected (if battery connection is to be made) to the battery
connectors of the SPS200M module.
5) The mains switch on the SPS200M module is turned on.
6) The battery switch on the SPS200M module is turned on.
After being powered, the system carries out a series of automatic tests in order to check the
current configuration. Beginning with the card that is in the rightmost slot, two LEDs that are
on the front plastic panel of each card start to light up in a row.
After the entire LEDs have started to light up, the message “connecting” appears on the LCD
screen of the LT200 (-H) or FT20 feature telephone set that has been connected to the
system. Once that message disappears, the system is ready to operate.
*
WARNING
1) The correct way of powering the system is putting the batteries in use after
turning the system on.
2) The correct way of shutting down the system is putting the batteries out of use
before turning the system off.