Karel DS200, Техническое справочное и монтажное руководство

Страница: 196 / 222

186
XV.4. JUMPER SETTINGS ON THE EX200 (8T0/0)
MODULE
Several configuration adjustments are supposed to be done in order to configure the ISDN
BRI lines that are on the EX200 (8T0/0) module. Those adjustments are done through
jumpers. A list of jumper settings is as follows:
Order of the Line
Positions of the jumpers for line setting
1
st
ISDN BRI line K4, K5 – pins 2,3 and K6, K7 – pins 2,3
2
nd
ISDN BRI line K8, K9 – pins 2,3 and K10, K11– pins 2,3
3
rd
ISDN BRI line K12, K13 – pins 2,3 and K14, K15 – pins 2,3
4
th
ISDN BRI line K16, K17 – pins 2,3 and K18, K19 – pins 2,3
5
th
ISDN BRI line K20, K21 – pins 2,3 and K22, K23 – pins 2,3
6
th
ISDN BRI line K24, K25 – pins 2,3 and K26, K27 – pins 2,3
7
th
ISDN BRI line K28, K29 – pins 2,3 and K30, K31 – pins 2,3
8
th
ISDN BRI line K32, K33 – pins 2,3 and K34, K35 – pins 2,3
XV.5. JUMPER SETTINGS ON THE EX200 (4E&M/0)
MODULE
Since several different configurations are possible for the E&M module, unlike the others,
some configuration adjustments are supposed to be done on it before it is installed in the
system. Those adjustments are done through jumpers. A list of jumper settings for different
configurations is as follows:
A) FOR THE SIGNALING CHANNEL CONFIGURATION:
Type 1
♦ LOWER PBX
E&M channel 1: JP1, JP4, JP17, JP19, JP22
E&M channel 2: JP5, JP8, JP31, JP33, JP36
E&M channel 3: JP9, JP12, JP24, JP26, JP29
E&M channel 4: JP13, JP16, JP38, JP40, JP43
♦ UPPER PBX
E&M channel 1: JP2, JP3, JP19, JP21
E&M channel 2: JP6, JP7, JP33, JP35
E&M channel 3: JP10, JP11, JP26, JP28
E&M channel 4: JP14, JP15, JP40, JP42