Karel DS200, Техническое справочное и монтажное руководство

Страница: 112 / 222

102
IX.5. CONFIGURING THE SYSTEM SOFTWARE
Several software packages, presented by the DS200 system provide the programmer to
program all the system parameters easily via a PC.
The basic programs used to configure the system software structure are:
Idea: All the TDM parameters of the system like routing, authorizations, definitions of
extensions and trunks and etc. are configured via Idea. Additionally, software updates can
easily be done by Idea.
KNE: All the IP related parameters of the system are programmed via KNE. KNE can be run
independently but it can also be run via Idea.
WEB Interface: The CPU block of the system has several parameters- i.e. firewall - which
needs configuration. The Web interface can be used to configure such parameters. Any web
browser can be used to access the CPU card, but Idea can also be used to activate the web
browser.
SNMP Client: DS200 systems support SNMP protocol. So any SNMP client program can be
used to reach the system and program some basic parameters.
The details of the all these interfaces and programs are given in the relevant guides prepared
for each program itself.
*
THE FEATURE LISTS AND SOFTWARE FACILITIES GIVEN IN THIS SECTION MAY
CHANGE WITH RESPECT TO THE SYSTEM SOFTWARE VERSION AND WITH
RESPECT TO THE TERMINALS USED BY THE EXTENSIONS.