Parking Assist System
49
Instruction
The reversing image function is only used as an auxiliary function
to assist the driver in reversing operation. ask the driver to drive
carefully when reversing and pay attention to the surrounding
conditions of the car, in order to avoid an accident.
Safety Instructions
Applicable to: cars equipped with this function
Backup Camera Descriptions*
It is recommended to practice parking in either the places with
scarce traffic or the parking lots with the help of the reversing
image function, in order to be familiar with the systems,
orientating lines and functions. It is better to do in a fair weather.
The images displayed on the display screen will vary depending
on the different states of the car such as motion, static and load.
Backup Camera Maintenance
Moisten the lens with the alcohol detergent for general lenses,
and clean the lens with dry cloth.
Remove the accumulated snow with plastic scraper.
It is best to use a deicing spray to remove the ice.
Warning !
The reversing camera cannot substitute looking back or
observation through the rearview mirror. The driver still needs
to concentrate on operation when reversing, and observe the
surrounding conditions of the car at any time.
The reversing camera cannot display all the parts behind the car
due to technical limitations, Please pay special attention to
young children and pets since the camera cannot observe them
under any circumstances,. Otherwise, there is a danger of
accident!
Don't neglect to observe the traffic situation because of the
reversing image on the display.
Don’t rely solely on the reversing image when adjusting the
parking position or parking. The image displayed may be
unclear since it is restricted by the technical conditions of the
reversing image system and by special objects such as narrow
rod and grids.
If the image is good and clear, the reversing image function may
be used as an auxiliary means. Due to reflections, lens
contamination or damage, the image may be affected and there
is a danger of accident!
If the image displayed on the display screen is blurred or the
zone behind the car cannot be seen (because the lens is
contaminated or damaged), prohibited to use the reversing
image function as an auxiliary means. Otherwise, there is a
danger of accident !
The images provided by the camera are two-dimensional ones
and the images displayed on the display screen may lack the
depth due to technical restrictions of the camera, Therefore,
even if there is an orientation assist on the display screen, it is
still difficult to accurately judge the distance between the object
behind the car and the vehicle.
If there are any changes in the installation position and the
installation angle of the camera, for example, in a rear collision,
do not use the reversing image function due to safety reasons.
Please check by a professional organization.
The reversing image function can be used only when the back
