Check and Refilling
84
−
Refill the coolant.
−
Close and screw the cap.
The coolant meeting the specified specifications must be added. If
the coolant additive G12+ is not available in emergency situations,
no other additives shall be filled. In this case, water can only be
added first, and then the coolant additive can be added as soon as
possible in the correct proportion.
Only new coolant can be added.
Add coolant to the position marked "F". When heated, excess
coolant will overflow from the cooling system through the relief
valve on the expansion tank cap.
When the coolant is greatly reduced, it shall be filled only when
the motor is fully cooled down, so as to avoid motor damage.
Warning !
The cooling system is under pressure! Do not open the
expansion tank cap when the motor is hot, otherwise there is a
risk of scalding!
Coolant additives and coolant are harmful to health.
Therefore, please keep the coolant additives in the original
container, make sure that children will not reach, otherwise
there is a risk of poisoning!
Information About Environmental
Protection
If it is a must to drain the coolant, the drained coolant must not be
reused. Catch the drained coolant in a container and recycle it in
accordance with the regulations on environmental protection.
Radiator Fan
The radiator fan may turn on automatically.
The radiator fan is an electronic fan. The fan is controlled
according to the temperature of the coolant and the temperature of
the front engine compartment.
The auxiliary fan may continue to operate for up to 10 minutes
after the motor is turned off, even when the ignition system is
turned off. In the following cases, the auxiliary fan may
automatically turn on again after stopping for a period of time.
The coolant temperature rises due to the cumulative effect of
heat.
The hot front compartment is further heated by strong sunlight.
Warning !
When working in the front compartment, it must be considered
that the fan may turn on by itself, otherwise there will be a risk of
injury!
