Wheel and Tire
93
Replace the wheels
Replace wheels
To make all tires wear evenly, it is recommended to perform the
tire rotation according to the schematic diagram. This gives all
tires almost the same life span.
New Tires or Wheels
New tires and wheels must be carefully chosen.
−
Use the tires with same structure, size (rolling circumference)
and same tire pattern on the four wheels to the greatest extent.
−
Do not only replace one tire, and replace at least the two tires
on the same shaft in the same time.
−
Do not use the tire products with an effective size greater than
that approved by us.
−
If you do not want to use the factory-installed tire and rim
combination, please consult the KANDI-authorized service
station before purchasing a new tire or rim.
Tires and rims are important structural parts. The tires and rims
approved by KANDI are most suitable for corresponding models,
so they play an important role in driving comfort and safety.
Knowing tire data makes it easy for you to make the right choice.
For example, radial tires have the following label on the side:
265/65R17 112 T.
It has the following meanings:
265
Tire width: mm
65
Height to width ratio: %
R
Radial tire structure mark R
17
Rim diameter: inches
112
Load capacity parameters
T
Vehicle speed mark
However, please note that although the size data on the tire is the
same, for example, the rated size is 265/65R17 112T or
235/70R16 106T, the actual size of different types of tires may
differ from this rated size or the tire appearance may vary greatly.
Therefore, when purchasing replacement tires, it is recommended
to use the original brand and specification tires.
