Anchor Aid
99
Auto jack
−
Rotate clockwise to lift the car and lower it counterclockwise.
The vehicle
must be
held by the jack at a specific supported point
under the frame.
If you use a trolley jack or a garage jacking machine or jacking
platform in service shop, these points also can be used as
supported points.
If the vehicle is supported at other position, it may cause damage
to the vehicle body, steering system, suspension system, motor
and brake system.
If the ground under the vehicle jack is soft, it will cause the
vehicle sliding off the jack. Therefore, the car jack must be placed
on a solid ground. If necessary, a firm backing plate can be placed
under the jack. On the smooth floor (such as ceramic tile of the
ground), an non-slip mat (such as rubber mat) should be placed
under the jack base.
Warning !
Proper measures must be taken to prevent the jack base from
slipping, otherwise there is a risk of injury!
If the vehicle jack is not placed in specified position, it may
cause damage to the vehicle. In addition, if the vehicle jack is
not fixed properly, it will slip off from the vehicle at any time,
and there is a danger of injury!
Caution!
When using a vehicle jack, it is best to secure the wheels with
blocks before jacking up the vehicle, so as to avoid accidents
(blocks must be used on slopes).
Tires with Directional Patterns
Tires with directional patterns must be installed in the specified
rotation direction.
For tires with directional patterns, you can know by arrows
indicating
the direction of rotation on the side of tires
. The tires
must be installed in this specified rolling direction. Only in this
way can the tires give full play to its optimum performance in
adhesion, noise reduction, wear resistance and water skiing
resistance.
If the wheel has to be installed against the direction of rotation
due to tire damage, care must be taken as the optimum
