Kamstrup MULTICAL 803 Скачать руководство пользователя страница 74

Страница: 74 / 171

MULTICAL® 803

Kamstrup A/S · Technical description · 5512-2360_A1_

_02.2019

Heart beat and status indications

MULTICAL® 803 uses the three small display segments in the lower left corner of the display to indicate different

status scenarios. Each segment will, depending on whether it is static or flashes, provide information about given

functionality in the calculator. A description can be found in the figure below:

① Heart beat segment

Flashes - This segment always flashes to indicate that both calculator and

display are active.

② SETUP and config segment

Permanently on - The calculator’s configuration log is full and it is therefore

no longer possible to modify the configuration.

Flashes - It is possible to access the SETUP loop. The segment flashes as long

as the calculator is in transport mode or 4 minutes after the calculator top

and base have been separated.

Off - It is not possible to access the SETUP loop or configure the calculator via

METERTOOL HCW.

③ Optical interface segment

Permanently on - The calculator’s optical interface is disabled and optical

communication is therefore not possible.

Flashes - The optical interface is temporarily active, flashes 4 minutes after

the calculator top and base have been separated. In this period, it is possible

to activate the optical interface permanently.

Off - The optical interface is active and it is possible to communicate with the

calculator.

The optical interface can be deactivated and activated via the optical read-out head and METERTOOL HCW. See the

technical description of METERTOOL HCW (5512-2097).

Содержание MULTICAL 803












































































































































































Результаты поиска

Содержание MULTICAL 803

Отзывы:

Kamstrup MULTICAL 803, Техническое описание, Страница: 74 / 171

Результаты поиска

Содержание MULTICAL 803

Отзывы: