Kamstrup MULTICAL 803 Скачать руководство пользователя страница 151

Страница: 151 / 171

MULTICAL® 803

Kamstrup A/S · Technical description · 5512-2360_A1_GB_02.2019

151

11.4

Modules

11.4.1

Data + pulse inputs (type no.: HC-003-10)

The module has a galvanically separated data port that interoperates with the KMP protocol (see paragraph 12.2).

The data output can be used for e.g. connection of external communication units or other hard-wired data

communication, which it is not expedient to carry out via optical communication on the calculator’s front.
The data connection is galvanically separated with optocouplers, which makes it necessary to use data cable type

6699-106 in order to adapt the signal for RS232 level, which is suitable for PCs and other RS232-based equipment.

See paragraph 12 for information on data sequences and protocols. If the computer does not have a COM port, data

cable with USB type 6699-098 is used.

If you are using data cable with USB, install a USB driver on PCs with the Windows operating system. The driver can

be downloaded from

www.kamstrup.com

> Downloads > Driver for Kamstrup USB.

11.4.2

Data + pulse outputs (type no. HC-003-11)

The module has a galvanically separated data port that interoperates with the KMP protocol (see paragraph 12.2).

The data output can be used for e.g. connection of external communication units or other hard-wired data

6699-106 in order to adapt the signal for RS232 level, which is suitable for PCs and other RS232-based equipment.

See paragraph 12 for information on data sequences and protocols. If the computer does not have a COM port, data

cable with USB type 6699-098 is used.

If you are using data cable with USB, install a USB driver on computers with the Windows operating system. The

driver can be downloaded from

www.kamstrup.com

> Downloads > Driver for Kamstrup USB.

Содержание MULTICAL 803












































































































































































Результаты поиска

Содержание MULTICAL 803

Отзывы:

Kamstrup MULTICAL 803, Техническое описание, Страница: 151 / 171

Результаты поиска

Содержание MULTICAL 803

Отзывы: