Kamstrup MULTICAL 803 Скачать руководство пользователя страница 39

Страница: 39 / 171

MULTICAL® 803

Kamstrup A/S · Technical description · 5512-2360_A1_GB_02.2019

EE=19 Time-controlled tariff
The time-controlled tariff is used for time division of heat consumption. If TL2 = 08:00, TL3 = 16:00 and TL4=23:00,

the daily consumption from 08:00 until 15:59 is accumulated in TA2, whereas the consumption during the evening

from 16:00 until 22:59 is accumulated in TA3 and the consumption during the night from 23:00 until 07:59 is

accumulated in TA4.
TL2 must include fewer hours than TL3 and TL3 must include fewer hours than TL4.

From and incl. TL2 to TL3 Accumulation in TA2 and main register

TL3 must follow TL2
TL4 must follow TL3

From and incl. TL3 to TL4 Accumulation in TA3 and main register

From and incl. TL4 to TL2 Accumulation in TA4 and main register

The time-controlled tariff is suitable for billing in housing areas close to industrial areas with large district heating

consumption as well as for billing industrial customers.

EE=20 Heat/cooling volume tariff
The heat/cooling volume tariff is used to divide volume into heat and cooling consumption in combined heat/cooling

meters, i.e. the tariff divides the consumed volume into heat and cooling volume for combined heat/cooling meters.

The total volume is accumulated in the register V1, whereas TA2 accumulates the volume consumed together with

E1 (heat energy) and TA3 accumulates the volume consumed together with E3 (cooling energy).
EE=20 only functions in heat/cooling meters of the meter types 3 and 6.
(TA4 is not used in this tariff type).

t2 and t1

≥

Volume is accumulated in TA2 and V1

(heat energy)

TL2 and TL3 are not used

t2 and t1

≤

Volume is accumulated in V1 only

t1 and t1

≤

Volume is accumulated in TA3 and V1

(cooling energy)

t1 and t1

≥

Volume is accumulated in V1 only

t1 = t2 and t1

≥

Volume is accumulated in V1 only, no

counting in energy registers

t1 = t2 and t1

≤

Volume is accumulated in V1 only, no

counting in energy registers

EE=21 PQ tariff
The PQ tariff is a combined power and flow tariff. TA2 functions as power tariff and TA3 functions as flow tariff.

≤

TL2 and Q

≤

TL3 Accumulation in main register only

TL2 = power limit (P)

TL3 = flow limit (Q)

TL2

Accumulation in TA2 and main register

TL3

Accumulation in TA3 and main register

TL2 and Q

TL3

Accumulation in TA2, TA3 and main
register

The PQ tariff can, for example, be used for customers who pay a fixed charge based on max power and max flow (TL4

and TA4 are not used in this tariff type).

Содержание MULTICAL 803












































































































































































Результаты поиска

Содержание MULTICAL 803

Отзывы:

Kamstrup MULTICAL 803, Техническое описание, Страница: 39 / 171

Результаты поиска

Содержание MULTICAL 803

Отзывы: