Kamstrup MULTICAL 803, Техническое описание, Страница: 68 / 171

MULTICAL® 803
68
Kamstrup A/S · Technical description · 5512-2360_A1_
GB
_02.2019
Step Action Illustration Notes
⑩ Mount the cable
connectors to the supply
module in the
connectors at the supply
module’s slot.
Important: There must
under no circumstances
be used cables with
lengths that make it
possible to mount the
connectors incorrectly.
This will result in
damage to MULTICAL®
803.
⑪ Reinstall the connection
board and both module
brackets by following
the steps ⑦ to ①. The
steps are executed in
reverse order of
disassembling.
Be alert not to over-
tighten the screws at
reassembly.
⑫ After connecting the
voltage supply, check
the voltage supply in the
MULTICAL® 803 display.
See paragraph 10.
Note: It may take up to
20 seconds before the
display with supply is
updated.
1 One 3.6 VDC power supply, supplies calculator and module M1 and module M2 ( Figure 4.1 in paragraph 1.1 “Mechanical
construction”). One additional 3.6 VDC power supply, supplies module M3 and module M4 ( Figure 4.2 in paragraph 1.1
“Mechanical construction”).
2 One 24 VDC power supply, provides galvanically separated 24 VDC voltage supply for, for example, analog signal outputs and
flow sensors with passive output ( Figure 4.3 in paragraph 1.1 “Mechanical construction”).