Kamstrup MULTICAL 803, Техническое описание, Страница: 23 / 171

MULTICAL® 803
Kamstrup A/S · Technical description · 5512-2360_A1_GB_02.2019 23
3.4 Configuration number
The software configuration of MULTICAL® 803 is defined on the basis of the configuration number. Below you see an
overview of the calculator’s configuration number. Each part of the configuration number is described in more detail
in the following paragraphs.
A - B - C C C - DDD - EE - FF - GG - L - M - N - PP - RR - T - VVVV
Flow sensor position
Inlet 3
Outlet 4
Measuring unit
GJ 2
kWh 3
MWh 4
Gcal 5
Auto Detect CCC codes (ULTRAFLOW®
Normal resolution (7 digits) 8 0 7
Normal resolution (8 digits) 8 0 8
High resolution (8 digits) 8 1 8
Static CCC codes
Reed switch (7 digits) 0 x x
Electronic, fast pulse (7 digits) 1 x x
Electronic, fast pulse (8 digits) 2 x x
Kamstrup, UF X4 (7 digits) 4 x x
Kamstrup, UF X4 (8 digits) 5 x x
Electronic, slow pulse (7 digits) 9 x x
Display
Heat meter 2xx
Heat/cooling meter 3xx
Cooling meter 5xx
Tariffs
No active tariff 00
Power tariff 11
Flow tariff 12
t1-t2 tariff 13
Inlet tariff 14
Outlet tariff 15
Time-controlled tariff 19
Heat/cooling volume tariff 20
PQ tariff 21
Pulse inputs A and B
See paragraph 3.4.7 FF GG
Integration mode
Fixed mode (2 s) Backlight by push button 4
Fixed mode (2 s) Backlight always on 9
Leakage limits (V1/V2)
OFF 0
1.0 % of qp + 20 % of q 1
1.0 % of qp + 10 % of q 2
0.5 % of qp + 20 % of q 3
0.5 % of qp + 10 % of q 4
Leakage limit, Cold water (In-A, In-B)
OFF 0
30 minutes without pulses 1
One hour without pulses 2
Two hours without pulses 3
Pulse Transmitter/Divider
Out-C: V1/4 5 ms 73
Out-C: V1/1, Out-D: V2/1 3.9 ms 80
Out-C: V1/1 3.9 ms 82
Out-C: V1/4 22 ms 83
Pulse outputs for count registers
E1 and V1 or E3 and V1 10 ms 94
E1 and V1 or E3 and V1 32 ms 95
E1 and V1 or E3 and V1 100 ms (0.1 s) 96
Controlled output based on data commands
Controlled output 99