MULTICAL® 302
60
Kamstrup A/S · Technical Description · 5512-1334_F1_GB_12.2016
10.2
Coupling for direct sensor
Slide the enclosed plastic coupling into place from the
end of the sensor tube until you feel a click when the
coupling has reached the first knurling.
The coupling must not be pushed further down than the
first knurling.
No matter where the direct sensor is installed it is very
important that you observe the tolerances stated in the
drawing to the left. If not, the O-ring may not provide
correct sealing.
10.2.1
Specification of coupling
Material:
PPS
Max. temp.:
150 °C permanently
Pressure stage:
PN16 and PN25