
Ultrasonic Diagnostic Instrument (Vet)
User’s Manual V1.01
- 37 -
Note: When the network is disconnected, the icon
on the K10 screen disappears.
10.5.2 Start using PC-side network workstation software
1. Freeze the image, press
key, a symbol “
>>>>
” prompt appears on lower right corner of the
screen, after the prompt disappear, the contents of the screen is transferred to network workstation;
2. Press
key to return to real-time status.
Description:
1. In the Network Printer software, network setting has two ways: Direct Line to the Ultrasound,
Line to the network. K10 equipment supports "Direct Line to the Ultrasound". In the “direct line
to the Ultrasound” way, the computer cannot connect to the Internet network.
2. The specific use of Network Printer sees its instructions for use.
10.6 Change the language for ultrasound workstation software
10.6.1 Change the language for mobile and PC-side software kx_station_v
1. Go to Settings of the phone or Pad, tap Language & input, tap Language and choose the used
language;
2. After finish the settings, enter the ultrasound workstation again, the ultrasound workstation
interface appears the changed language.
Note: Mobile and PC-side workstation software kx_station_v supports Chinese and English.
Other languages are not support.
10.6.2 Change the language for PC-side network workstation software Network Printer
The language change for Network Printer software sees its instructions for use.
Attention:
1. Some network anomalies cause a timeout for a long time, especially unplug the network
cable when connecting, so recommend the user not to do network anomalies operation.
2. During the network printing, do not close the
software.