Ultrasonic Diagnostic Instrument (Vet)
User’s Manual V1.01
- 31 -
3. PC-side network workstation software Network Printer is ultrasound image software on the
PC-platform, which is driven under Microsoft Windows XP, Windows 7 or Windows 8 operating system,
without to install the driver.
10.3 Mobile ultrasound workstation software kx_station_v
All the icons on the mobile ultrasound workstation software may be different due to the display screen
of the phone or Pad; the display interface may be slightly different, the actual products shall govern. The
usage for the phone and Pad is similar, this article only take phone as an example to introduce.
Wi-Fi
10.3.1 Preparation before use
1. In the K10 preset interface, Wifi is set to “On”;
2. Connect to WLAN. Go to Settings of phone, tap WLAN, open WLAN, the phone will search and
list the available WLAN;
3. In the available WLAN list, select K10 network ID, such as “1808880”, connect to it;
4. After the connection is successful, tap the icon “
kx_station_v” to enter ultrasound workstation
interface, the wireless signal icon “ ” appears on the lower left corner of the K10 screen, then you can use
the mobile ultrasound workstation software.
Note:
1. You first turn on the Wifi of K10 equipment and then set up the phone’s WLAN. After
WLAN connection is successful, open the ultrasound workstation software.
2. The Wifi network ID of K10 equipment is the default number displayed on the nameplate of
K10, such as “1808880”.
3. When the network is disconnected, the wireless signal icon on the K10 screen disappears.
10.3.2 Start using mobile ultrasound workstation software
Mobile ultrasound workstation software kx_station_v includes image view, check list management,
obstetric list management. kx_station_v software consists of four function keys: Image View
, Check
List
, OB
and quit
.
10.3.2.1 Image view
1. After the connection between K10 equipment and kx_station_v is successful, the lower left corner
of K10 screen shows the wireless signal icon
;
2. The images stored inside of K10 equipment will be transferred to the ultrasound workstation:
a. Transfer a single image: In B, B/B, B/M, M mode, freeze the image, press
key to enter saving
or reading image status, such as choose “004*”; Press
key, a symbol “
>>>>
” prompt appears
on lower right corner of the screen, after the prompt disappear, the image stored in frame
“004*” is transferred to ultrasound workstation;
b. Batch images transfer: Freeze the image, press
key to transfer all the stored images to the
ultrasound workstation;