Kaixin K10 Скачать руководство пользователя страница 12

Страница: 12 / 51

Ultrasonic Diagnostic Instrument (Vet)

User’s Manual V1.01

- 5 -

Chapter Four

Operation Condition

4.1 Power supply

Adapter ratings: 100-240V~, 1.2-0.6A, 50-60Hz

Adapter model: BJE01-40-001M

Output of adapter: DC12.8V 3.0A

Main device rating: DC12.8V 3.0A

Internal supply voltage: DC11.1V

10%

4.2 Operation Environment

Ambient temperature: 10℃-40℃

Relative humidity: 30%-75% (without condensation)

Atmospheric pressure: 700hPa-1060hPa.

Altitude: < 2000 m

Overvoltage: Overvoltage Category

Ⅱ

Pollution degree: 2

4.3 Storage and Transportation

Ambient temperature: -20℃-55℃

Relative humidity: 30%-93% (without condensation)

Atmospheric pressure: 700hPa-1060hPa

Danger:

Do not use this equipment where flammable gas (such as anesthetic gas, oxygen

or hydrogen) or flammable liquid (such as alcohol) are present. Failure to do so may result

in explosion.

Warning:

Avoid using this equipment with high-frequency electric knife, high-frequency

therapy equipment or defibrillators and other electronic devices, or may an electric shock

occur to the patient.

Attention:

System should be avoided using in following environments:

1. Moist

2. Rain

3. Thunderstorm weather

4. No ventilation

5. Close to heat source (e.g. heaters, microwave ovens, ovens, water heaters, etc.)

6. Direct sunlight

7. Dramatic temperature change

8. Poisonous gas

9. Corrosive gas

10.Strong shock

11. Strong electromagnetic field (e.g. MRI)

Attention:

The mains voltage is varies with different countries or regions.

Attention:

Using radio transmitting equipment nearby the system may interfere with the

normal operation of the system. Prohibited carry or use of devices that can generate radio

waves within the room installed this system, such as cell phones, radio transceivers and

wireless remote control toys.

Содержание K10




















































Результаты поиска

Содержание K10

Отзывы:

Kaixin K10, Руководство пользователя, Страница: 12 / 51

Результаты поиска

Содержание K10

Отзывы: