
Ultrasonic Diagnostic Instrument (Vet)
User’s Manual V1.01
- 36 -
10.4.2 Start using PC-side ultrasound workstation software
The function for PC-side ultrasound workstation software kx_station_v is similar to the mobile
workstation, including image view, check list management, obstetric list management. The following
describes the differences.
1. In the check list interface, click “Preview”, the check list is displayed in the form of report, the user
can preview its contents; click “Print” to print out the check list.
2. In the obstetric list interface, click on “Preview”, the obstetric list is displayed in the form of report,
the users can preview its contents; click “Print” to print out the obstetric list.
3. The stored bmp images, check lists and obstetric lists are stored in the kxStation folder of
computer's D drive. The image is stored in D: \ kxSation \ image; the checklist is stored in D: \ kxSation \
checklist; the obstetric record is stored in D: \ kxSation \ OB.
4. The stored check lists files and obstetric lists files (suffix .db) need to be viewed using ultrasound
workstation software.
10.5 PC-side network workstation software Network Printer
PC-side network workstation software Network Printer communicates with K10 equipment via a
network cable. It can transfer the contents of the screen to the network workstation. The specific
connection method is shown in the figure below:
10.5.1 Preparation before use
1. Turn on the K10 equipment.
2. Use a network cable to connect the network port of ultrasonic diagnostic instrument and the
computer's network port, and then installs the printer on your computer.
3. Unzip the “Network Printer_V2.0” compressed package to PC side, open the folder of Network
Printer_V2.0, and right click the icon
to select “Run as administrator” to open the
software.
4. In the Network Printer software, the default way “Direct Line to the Ultrasound”, without requiring
the user to set network parameters of ultrasonic diagnostic instrument. After the connection between K10
equipment and network workstation is successful, the
icon appears on the lower left corner of the
K10 screen, then you can use the network workstation software Network Printer.
Attention:
1. In Windows XP operating system, directly double click the icon
to
open the software; In Win 7, Win 8 operating system, you need to right click and choose
“Run as administrator” to run the software.
2. When you run the Network Printer.exe first time, please close the Windows Firewall or
Anti-virus software, if pop-up the Windows Security Alert or appears unknown
program, choose the all access or unblock, the software can run normally.